Table of Contents
Advertisement
Features Summary
Basic
features!
How to set menu options
The following method of programming is applied except features #01, #02 and #03. For features
#01, #02 and #03, refer to the programming table below.
1. Press
MENU
.
2. Press
or
is displayed.
3. Press
or
is displayed.
4. Press
.
SET
5. Press
MENU
.
Programming table
Code
Feature & Display
Setting the date and time
SET DATE & TIME
#01
PRESS SET
Setting your logo
#02
YOUR LOGO
PRESS SET
Setting your facsimile telephone
number
#03
YOUR FAX NO.
PRESS SET
Printing the sending report
SENDING REPORT
MODE=ERROR
#04
To print and check the sending
report for fax transmission results
(p. 30).
Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=3
#06
To change the number of rings
before the unit answers a call
in FAX ONLY mode.
50
until the desired feature
until the desired setting
[±]
[±]
Note:
Step 3 may be slightly different
depending on the feature.
See page 49 for more details.
Settings
mm/dd/yy
See page 15 for details.
hh:mm
(2 digits for
each entry)
See page 16 for details.
(Up to 30
characters)
See page 18 for details.
(Up to 20
digits)
"ERROR": The sending report will
ERROR
be printed only when fax
transmission fails.
ON
"ON": The sending report will be
printed out after every transmission.
OFF
This setting is also available after
activating FAX ONLY mode (p. 39).
If you are using the unit with an
1, 2, 3, 4,
answering machine, set to "5
5 EXT.TAM
EXT.TAM" (p. 42).
(The default setting is in bold type.)
How the unit operates
Advertisement
Table of Contents
