Table of Contents
Advertisement
7.2 Basic features
Feature
Setting the date and
time
Setting your logo
Setting your fax
number
Printing a sending
report
Changing the ring
count in FAX ONLY
mode
Changing the ring
count in TAM/FAX mode
Changing the maximum
recording time for
incoming messages
Setting the remote
operation ID
Setting the dialling
mode
Feature code
Selection
Enter the date and time using the dial keypad. See page 14 for
{#}{0}{1}
details.
Enter your logo using the dial keypad. See page 15 for details.
{#}{0}{2}
Enter your fax number using the dial keypad. See page 16 for
{#}{0}{3}
details.
{0} "OFF": Sending reports will not be printed.
{#}{0}{4}
{1} "ON": A sending report will be printed after every fax
transmission.
{2} "ERROR" (default): A sending report will be printed only when
a fax transmission fails.
{1} "1"
{#}{0}{6}
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
Note:
L Set feature #77 to "FAX ONLY" (page 40) beforehand.
{0} "TOLL SAVER"
{#}{0}{6}
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
See page 27 for details.
Note:
L Set feature #77 to "TAM/FAX" (page 40) beforehand.
{0} "GREETING ONLY": The unit plays the greeting message but
{#}{1}{0}
does not record any incoming messages.
{1} "1 MINUTE": 1 minute
{2} "2 MINUTES": 2 minutes
{3} "3 MINUTES" (default): 3 minutes
1. {MENU} i {#}{1}{1}
{#}{1}{1}
2. To activate the remote operation feature, enter a 3-digit
remote operation ID.
3. {SET} i {MENU}
If you cannot make calls, change this setting according to your
{#}{1}{3}
telephone line service.
{1} "PULSE": For rotary/pulse dial service.
{2} "TONE" (default): For tone dial service.
L To deactivate the remote operation feature, press {*}.
7. Programmable Features
35
Advertisement
Table of Contents
