Receiving Faxes
TEL
mode!
(answering all calls manually)
Activating TEL mode
If the arrow ( ) is shown on the right of the
display, turn it off by pressing
Display:
Receiving a fax manually
1
When the unit rings, lift the handset to
answer the call.
2
When:
— document reception is required,
— a fax calling tone (slow beep) is heard, or
— no sound is heard,
FAX START
press
Replace the handset.
3
The unit will start fax reception.
Note:
If you do not answer the call within 10 rings, the unit
will temporarily switch to the fax and the caller can
send a document.
To stop receiving
Press
.
STOP
Friendly reception feature
When you answer a call and hear a fax calling tone
(slow beep), the unit will automatically start fax
reception.
If this feature is not required, set feature #46 to off
(p. 54).
38
AUTO ANSWER
TEL MODE
ON
.
CONNECTING.....
Display
.
AUTO ANSWER
Fax reception in memory
When a printing problem is detected, the unit
will temporarily store the received document
into memory.
While the document is in memory:
— the display will show an error message and
the following alternately,
Display:
— slow beeps will sound if feature #44 is set to
on (p. 54).
Follow the instructions on pages 57 and 58 to
solve the problem.
For memory capacity, see page 73.
FAX START
STOP
FAX IN MEMORY