Table of Contents
Advertisement
7. Programmable Features
7.2 Basic features
Feature
Setting the date and
time
Setting your logo
Setting your fax
number
Printing a sending
report
Changing the ring
count in FAX ONLY
mode (KX-FP206 only)
Changing the ring
count in FAX ONLY
mode (KX-FP218 only)
Changing the ring
count in TAM/FAX mode
(KX-FP218 only)
Changing the maximum
recording time for
incoming messages
(KX-FP218 only)
34
Feature code
Selection
Enter the date and time using the dial keypad. See page 12 for
{#}{0}{1}
details.
Enter your logo using the dial keypad. See page 13 for details.
{#}{0}{2}
Enter your fax number using the dial keypad. See page 14 for
{#}{0}{3}
details.
{0} "OFF": Sending reports will not be printed.
{#}{0}{4}
{1} "ON": A sending report will be printed after every fax
transmission.
{2} "ERROR" (default): A sending report will be printed only when
a fax transmission fails.
{1} "1"
{#}{0}{6}
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
{1} "1"
{#}{0}{6}
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
{8} "8"
{9} "9"
Note:
L Set feature #77 to "FAX ONLY" (page 39) beforehand.
{0} "TOLL SAVER"
{#}{0}{6}
{2} "2" (default)
{3} "3"
{4} "4"
{5} "5"
{6} "6"
{7} "7"
See page 25 for details.
Note:
L Set feature #77 to "TAM/FAX" (page 39) beforehand.
{0} "GREETING ONLY": The unit plays the greeting message but
{#}{1}{0}
does not record any incoming messages.
{1} "1 MINUTE": 1 minute
{2} "2 MINUTES": 2 minutes
{3} "3 MINUTES" (default): 3 minutes
Advertisement
Table of Contents
