Table of Contents
Advertisement
Programming!
The unit provides various programming features. Program the desired settings by referring to the
programming tables (p. 50–55).
General programming method
1
Press
MENU
Display:
2
Select the feature you wish to program.
For basic features (p. 50, 51):
Press
or
feature is displayed.
For advanced features (p. 52–55):
Press
or
displayed.
Press
SET
the desired feature is displayed.
The current setting of the feature will be
displayed.
Press
or
3
is displayed.
This step may be slightly different
depending on the feature.
Press
.
4
SET
The setting you selected is set, and the
next feature will be displayed.
5
To exit programming, press
Programming by entering the program code
number directly
You can select a feature by directly entering the program
code (# and 2-digit number) instead of using
in step 2.
.
1. Press
MENU
2. Press
and the 2-digit code number.
3. Follow steps 3 to 5 above.
See programming tables for code numbers
(p. 50–55).
.
SYSTEM SET UP
PRESS NAVI.[
until the desired
until the following is
ADVANCED MODE
PRESS SET
and press
or
until the desired setting
MENU
Features Summary
I H
]
until
.
To cancel programming
Press
MENU
or
Display
MENU
to exit the program.
SET
49
Advertisement
Table of Contents
