Table of Contents
Advertisement
Sending the same document to pre-programmed parties
1
Insert the document FACE DOWN.
If necessary, press
to select the desired resolution (p. 29).
2
Press
BROADCAST
You can also use
then press
following is displayed, and press
Display:
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each item, calling each
number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report.
Note:
If you select the "FINE", "SUPER FINE" or "PHOTO"
resolution, the number of pages that the unit can
transmit will decrease.
If the document exceeds the memory capacity (p. 73),
sending will be canceled.
If one of the items is busy or does not answer, the item
will be skipped. All skipped items will be redialed up to
2 times after all of the other items have been called.
To cancel the broadcast setting
1. Press
while the unit displays the following.
STOP
Display:
The display will show the following.
2. Press
SET
.
or
repeatedly
.
/
key. Press
or
until the
SET
.
<BROADCAST>
SEND:PRESS SET
@BROADCASTING
SEND CANCELED?
YES:SET/NO:STOP
Sending Faxes
Display
BROADCAST
STOP
SET
35
Advertisement
Table of Contents
