Table of Contents
Advertisement
Display!
If the unit detects a problem, one or more of the following messages will appear on the display.
Display message
CALL SERVICE
CHECK DOCUMENT
CHECK FILM
CHECK MEMORY
CHECK PAPER
COVER OPEN
DIRECTORY FULL
FAX IN MEMORY
FAX MEMORY FULL
FILM EMPTY
There is something wrong with the unit. Contact our service
personnel.
The document was not fed into the unit properly. Reinsert the
document. If misfeeding occurs frequently, clean the document
feeder rollers (p. 68) and try again.
The ink film is not installed. Install it (p. 64).
Memory (telephone numbers, parameters, etc.) has been erased.
Re-program.
The recording paper is not installed or the unit has run out of
paper. Install paper and press
The recording paper is not fed into the unit properly. Reinstall
paper (p. 13) and press
The recording paper has jammed near the recording paper
entrance. Clear the jammed paper and press
message (see "When paper has jammed near the recording
paper entrance" on page 66). Do not install folded or heavily
curled paper.
The cover is open. Close it.
There is no space to store new items in the navigator directory.
Erase unnecessary items (p. 22).
The unit has a document in memory. See the other displayed
message instructions to print out the document.
The memory is full of received documents due to a lack of
recording paper or a recording paper jam. Install paper or clear
the jammed paper.
When performing memory transmission, the document being
stored exceeds the memory capacity of the unit. Transmit the
entire document manually.
The ink film is empty. Replace the ink film with a new one (p. 64).
The ink film is slack. Tighten it (see step 4 on page 64) and install
again.
For fax advantage assistance, call 1-800-435-7329.
Error Messages
Cause & solution
to clear the message.
SET
SET
to clear the message.
SET
to clear the
(continued)
57
Advertisement
Table of Contents
