Programmable Features; Programming; Basic Features - Panasonic KX-FT988FX Operating Instructions Manual

8. Programmable Features

Features Summary 8 Programmable Features

8.1 Programming

{A}{B}{<}{>}
8.1.1 Programming basic features
1
Press {MENU}.
2
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the desired
feature.
L The current setting of the feature will be
displayed.
3
Press {A} or {B} repeatedly to display the desired
setting.
L This step may be slightly different depending on
the feature.
4
Press {SET}.
L The setting you selected is set, and the next
feature will be displayed.
5
To exit programming, press {MENU}.
8.1.2 Programming advanced features
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display "ADVANCE
SETTINGS".
3
Press {SET}.
4
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the desired
feature.
L The current setting of the feature will be
displayed.
5
Press {A} or {B} repeatedly to display the desired
setting.
L This step may be slightly different depending on
the feature.
6
Press {SET}.
L The setting you selected is set, and the next
feature will be displayed.
7
To exit programming, press {MENU}.
32
{SET} {MENU}
To program by entering the program code number
directly
You can select a feature by directly entering its program
code (# and a 2-digit number) instead of using {<} or
{>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code (page 32 to page
36).
3. Press {A} or {B} repeatedly to display the desired
setting.
L This step may be slightly different depending on
the feature.
4. Press {SET}.
5. To exit programming, press {MENU}.
To cancel programming
Press {MENU} to exit.

8.2 Basic features

Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 11 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 12 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 13 for details.
Code #04: Printing a sending report
SENDING REPORT
=ERROR [±]
To print a sending report for fax transmission results
(page 20).
"ERROR" (default): A sending report will be printed only
when fax transmission fails.
"ON": A sending report will be printed after every
transmission.
"OFF": The sending reports will not be printed.
Code #06: Changing the ring setting in FAX ONLY
mode
FAX RING COUNT
RINGS=2 [±]
To change the number of rings before the unit answers a
call in FAX ONLY mode.