Omron NX Series User Manual page 431

l Transferring Only the EtherNet/IP Connection Settings
You can transfer tag sets and connections to the EtherNet/IP devices.
1
Establish an online connection with the Controller.
2
Click the Transfer to Controller or Transfer from Controller Button in the EtherNet/IP Con-
nection Setting Tab Page.
The tag settings and connection settings set at that time are transferred to the Controller con-
nected online.
3
If the Controller connected online is in RUN mode, the dialog box to confirm whether to switch
to PROGRAM mode before transferring the settings is displayed.
l Comparison
The differences in the tag set and connection settings between the project and the EtherNet/IP de-
vices can be displayed.
1
Click the Compare Button in the EtherNet/IP Connection Setting Tab Page.
NX-series EtherNet/IP Unit User's Manual (W627)
Appendices
A
A-31