Omron NX Series User Manual page 257

Instance ID
Specify 00 or 01 hex.
Attribute ID
The attribute ID specifies the information to read.
l Class Attribute ID
The class attribute ID specifies the attribute of the entire object.
Attribute ID Parameter name
01 hex Revision
02 hex Max Instance
l Instance Attribute ID
The instance attribute ID specifies the attribute of the instance.
Attribute ID Parameter name
01 hex Vendor ID
02 hex Device Type
03 hex Product Code
04 hex Revision
Major Revision
Minor Revision
05 hex Status
06 hex Serial Number
07 hex Product Name
1. Product Codes for Each Model
NX701-££££
NX502-1300
NX502-1400
NX502-1500
NX-EIP201
NX102-1200
NX102-1100
NX102-1000
NX-series EtherNet/IP Unit User's Manual (W627)
Description
Revision of the object
The maximum instance num-
ber
Description
Vendor ID
Device type
Product code
Device revision
Major revision
Minor revision
Status of the EtherNet/IP
port
Serial number
Product name
Model
10 CIP Message Communications
Read data
Attrib-
Data
ute
type
Read UINT 0001 hex
Read UINT 0001 hex
Read data
Attribute
Data
type
Read UINT 002F hex
Read UINT 000C hex
Read UINT Refer to (1) Product Codes
for Each Model, below.
Read Struct ---
Read USINT Refer to (2) Major and Minor
CIP Revisions, below.
Read USINT
Read WORD Refer to (3) Status Details of
the Built-in EtherNet/IP Port,
below.
Read UDINT Set value
Read STRIN Set value
G
Product Code
067D hex
0BF5 hex
0BF6 hex
0BF7 hex
0BF4 hex
0BBB hex
0BBA hex
0BB9 hex
10
Value
Value
10-29