Omron NX Series User Manual page 278

11 SNMP Agent
Subtree name
ifOutDiscards
ifOutErrors
ifOutQLen
ifSpecific
l Ip Group: Ip
Subtree name
ipForwarding
IpDefaultTTL
IpInReceives
IpInHdrErrors
IpInAddrErrors
11-8
Standard [(identifier) attribute]
[(19) RO]
The number of packets that had no errors but
were discarded in the sending process (due
to a send buffer overflow, etc.).
[(20) RO]
The number of packets that could not be sent
because of an error.
[(21) RO]
The size of the send packet queue (i.e., the
number of packets).
[(22) RO]
The object ID that represents a reference to
the media-specific MIB for the interface.
For example, for Ethernet, set the object ID
of the MIB that defines Ethernet. If there is no
information, set { 0.0 }.
Standard [(identifier) attribute]
[(1) RW]
Indicates if the device operates as a gateway.
IP gateways can transfer datagrams, but IP
hosts can perform only source routing. Some
nodes take only one of these values. There-
fore, if you attempt to change this object from
the SNMP Manager, a badValue error is re-
turned.
forwarding (1)
not-forwarding (2)
[(2) RW]
The default value set for the IP header TTL if
no TTL value was given by the transport lay-
er protocol.
[(3) RO]
The number of all IP datagrams that reached
the interface, including errors.
[(4) RO]
The number of received datagrams that were
discarded because of an IP header error
(checksum error, version number error, for-
mat error, TTL error, IP option error, etc.).
[(5) RO]
The number of packets that were discarded
because the destination address in the IP
header was not valid.
Implementation spec-
Support
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- Always 0.
ed
Support- 0.0
ed
Implementation spec-
Support
Support- forwarding (1), not-for-
ed warding (2)
Depends on the set-
tings in EtherNet/IP
Port Settings - TCP/IP
Settings - Port
Forward on the Sys-
mac Studio.
Support- 64
ed
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
NX-series EtherNet/IP Unit User's Manual (W627)
ifications
ifications