Omron NX Series User Manual page 282

11 SNMP Agent
Subtree name
ipRouteProto
ipRouteAge
ipRouteMask
ipRouteMetric5
ipRouteInfo
ipNetToMediaTable
11-12
Standard [(identifier) attribute]
[(9) RO]
This is the routing mechanism used to deter-
mine routes. Some values correspond to
gateway routing protocols, but be aware that
the host may not support those protocols.
other (1): Other than the following items.
local (2): A route set on the local machine.
netmgmt (3): A route set by network manage-
ment.
icmp (4): A route set by an ICMP redirect or
some other ICMP function.
egp (5): EGP
The following are gateway protocols:
ggp (6): GGP
hello (7): HELLO
rip (8): RIP
is-is (9)
es-is (10)
ciscolgrp (11)
bbnSpflgp (12)
ospf (13): OSPF
bgp (14)
[(10) RW]
The elapsed time since this route was updat-
ed (in seconds).
[(11) RW]
The subnet mask value in relation to ipRou-
teDest.
On systems that do not support a custom
subnet mask value, this value is based on the
address class of the ipRouteDest field.
If ipRouteDest is 0.0.0.0, this value is also
0.0.0.0.
[(12) RW]
The alternative routing metric.
[(13) RO]
The MIB object ID for the routing protocol
used by this route. If not defined, set to {0.0}.
[(22) NA]
The IP address conversion table used to map
IP addresses to physical addresses.
Implementation spec-
Support
Support- According to the stand-
ed ard.
Support- Always 0.
ed
Support- According to the stand-
ed ard.
Support- According to the stand-
ed ard.
Support- 0.0
ed
--- ---
NX-series EtherNet/IP Unit User's Manual (W627)
ifications