Selecting The Source By The Remote Control; Enjoying Surround Sound Effects - Panasonic SC-PT870 Operating Instructions Manual

Selecting the playback source (continued)
DVD
USB, iPod
SETUP

Selecting the source by the remote control

DVD
RADIO
EXT-IN
USB
iPod
Press [SELECTOR] on this unit to select source from this
unit. ( 39)
Enjoying sound from all speakers and various sound
effects
SURROUND
SETUP,
─CH SELECT
≥The following sound effects may not be available or
have no effect with some sources, or when headphones
are used ( 39).
≥You may experience a reduction in sound quality when
these sound effects are used with some sources. If this
14
occurs, turn the sound effects off.
USB RADIO
RADIO, EXT-IN
DVD iPod EXT-IN
START
SETUP
DVD/CD ( 11)
Each time you press the button:
FM ( 12)
AV: For audio input through the
SCART (AV) terminal.
AUX : For audio input through the
§
AUX terminal.
For audio input through the
D-IN :
§
OPTICAL IN terminal.
( right)
"(TV)" will appear beside "AUX" or
§
"D-IN", indicating the TV audio
setting for VIERA Link "HDAVI
Control" ( 22).
USB ( 24)
iPod ( 24)
+, VOL
VOL
SURROUND SOUND
SOUND
OK
OK
SETUP W.SRD
W.SRD
-CH SELECT
[Note]
Confirm the audio connection to the SCART (AV), AUX or
OPTICAL IN terminal on this unit when you select the
corresponding sources (
TV to its minimum, and then adjust the volume of this unit.
Making settings for digital audio input
Select to suit the type of audio from the OPTICAL IN
terminal on this unit.
1 While in "D-IN" mode
Press [SETUP] to select "MAIN/SAP", "DRC" or
"PCM FIX".
2 While the selected mode is displayed
Press [3, 4] to make the setting.
MAIN/SAP mode (Only works with Dolby Dual Mono):
MAIN, SAP , MAIN+SAP
§
"SAP" = Secondary Audio Program
§
Dynamic Range Compression
DRC ON: Adjust for clarity even when the volume is low
by compressing the range of the lowest sound
level and the highest sound level. Convenient
for late night viewing. (Only works with Dolby
Digital)
DRC OFF: The full dynamic range of the signal is
reproduced.
PCM FIX mode
PCM ON: Select when receiving only PCM signals.
PCM OFF: Select when receiving Dolby Digital and PCM
signals.
(When receiving true 5.1-channel surround sound, select
"PCM OFF".)
[Note]
≥Audio that is input through the OPTICAL IN terminal is
not output from the HDMI terminal.
≥Underlined items in the above are factory settings.

Enjoying surround sound effects

SURROUND OUTPUT indicator on
SURROUND
this unit will light up when there is
surround sound effect.
Each time you press the button:
STANDARD:
Sound is output as it was recorded/
encoded.
Speaker output varies depending on
the source.
MULTI-CH:
You can enjoy sound from the front
speakers, as well as the surround
speakers even when playing a
2-channel sound or non-surround
sound.
MANUAL: (
9, 10). Reduce the volume on the
(stereo audio)
§
15)