Pairing; Garage And Device Page; Charging Base Set-Up - Stiga Stig-A 1500 Instruction Manual

NOTE: If the charging base has been successfully paired, the indicator light in the charging base
will be illuminated with a steady light while the robot lawn mower is away from the charging base.
If pairing has not been completed, the indicator light flashes.
NOTE: After pairing all devices, before using the product, it is necessary to perform the "
calibration of the charging base ", (see par. 4.7.5).
NOTE: if the robot lawn mower is not detected by your mobile device, make sure it is not paired
with another device, (see Par. 5.3.6).
4.7.4. GARAGE AND DEVICE PAGE
The "Garage" section displays all Stiga products linked to the user profile.
Paired products are displayed by scrolling left and right between screens.
For each of the products displayed, it is possible to access a series of options allowing the user to:
• rename or delete the device from the user account;
• access device information and manuals;
• check the connectivity status to the mobile network as well as the GNSS signal status of the robot
lawn mower and its control station;
• perform firmware updates.
From the "Garage" section it is possible to access the "Product Page" of each paired device.
The robot lawn mower product page is divided into three sections:
• Robot;
• Settings;
• My Garden.
These sections can be viewed by scrolling left and right between the different screens.
The "Robot" section allows the user to:
• Check robot lawn mower status (battery level, operating status, selected cutting mode).
• Starting and stopping the robot lawn mower.
• Force the robot lawn mower to return to the charging base.
• Get the robot lawn mower to work in an area that cannot be reached independently (if this option
is available on the app).
• Check remaining connectivity hours and renew data package.
The "Settings" section allows the user
• Select the cutting mode "Spot Cut" or "Scheduled".
• Set-up or change the work program.
• Set-up or change the cutting height.
• Adjust the position of the robot lawn mower inside the charging base.
• Initiate the hibernation procedure for winter storage.
• Activate and select the sensitivity of the Rain Sensor.
The "My Garden" section allows the user to:
• Record virtual boundaries, relocation routes, and no-cutting zones areas via the app wizards.
• View the garden map with the recorded items and real-time location of the robot lawn mower.
4.7.5. PAIRING THE CHARGING BASE
Before using your robot lawn mower, the charging base must be paired (see par. 4.7.3).
EN
4. INSTALLATION
33