Stiga Stig-A 1500 Instruction Manual page 29

3. Secure the charging base (L) to the ground with the fixing screws (M).
4. Make sure the satellite reference station (A) is connected to the charging base via its connector:
5. Connect the power supply unit to the charging base and screw in the connector.
6. Connect the power supply plug to the electrical outlet.
7. When the robot lawn mower is not in the charging base, make sure that the indicator light on the
charging base (N) is lit with a fixed light. (See Par. 5.4).
WARNING:
The power cable, power supply unit, extension cord and all other electric cables
which do not belong to the product must remain outside the cutting area to
maintain their distance from hazardous moving parts and prevent damage to
cables which may come into contact with live parts.
L
NOTE: If necessary, it is possible to extend the power cable to the charging base by using the
extension cables. It is permitted to use a maximum of two 5-meter extension cables
(See Chap. 9 "Accessories").
EN
C M
A
N
4. INSTALLATION
25