Related Manuals for Stiga 125 COMBI PRO 8211-0543-01
Summary of Contents for Stiga 125 COMBI PRO 8211-0543-01
- Page 1 S T I G A P A R K 4 WD 1 07 M 1 07 M H D 1 21 M 12 5 Comb i P r o INSTRUCTIONS FOR USE £ »HC“P”K÷»fl œOÀ‹«Œ¬¿“EÀfl® 8211-0543-01...
- Page 2 125 Combi Pro 125 Combi Pro 121 M 107 M HD 5 125 Combi Pro Torx T30 F Torx T30 7 121 M 125 Combi Pro 125 Combi Pro 107 M HD 121 M 6 125 Combi Pro 8 121 M 10 mm 10 mm...
- Page 3 9 107 107 M 13 107 M HD 10 107 13 mm 13 mm 10 mm 12 107 M...
- Page 4 5 mm 21 125 Combi Pro 107 M HD 24 Nm 24 Nm P 24 Nm Q 9,8 Nm...
- Page 5 E.g. “See 2.3.2”. ENGLISH 2 DESCRIPTION 2.1 General The cutting deck is intended for use on Stiga’s 4- wheel drive Park machines. The cutting deck is supplied in one of the follow- ing versions: • With manual adjustment of cutting height.
- Page 6 2.3.3 Rear mounting The cutting deck’s rear section is secured with the pins in fig. 13. 2.3.4 Mounting in implement lifter The deck is mounted in the implement lifter with a chain and snap hooks. One snap hook is intended for the working position and can be moved in the chain links to set the lift- ing force.
-
Page 7: Tyre Pressure
3.2 Installation of 107 M HD, 121 M 1. Place the cutting deck in position in front of the machine. 2. Install the following components on both wheel axles: • Washer (3:B). • Deck mount (3:C). • Washer (3:B). • Circlip (3:A). 3. -
Page 8: Using The Machine
5. Undo the screws (7:H and 12:K) so that the deck rests against the plank and the spacer. Check that the deck does not lean sideways in relation to the machine. 6. Tighten the screws (7:H and 12:K) to 22 Nm. 7. -
Page 9: Service Position
See fig. 24. Always check synchronisation after a collision. If there is any suspicion of incorrect synchronisa- tion, contact an authorised Stiga workshop for re- pair work to be carried out. The blades in the 125 Combi Pro are freely rotat-... -
Page 10: Spare Parts
6 SPARE PARTS STIGA genuine spare parts and accessories are de- signed specifically for STIGA machines. Please note that ‘non-genuine’ spare parts and accessories have not been checked or approved by STIGA: The use of such parts and accessories can affect the function and safety of the machine. - Page 11 w w w. s t i g a . c o m GGP Sweden AB · Box 1006 · SE-573 28 TRANÅS...