12.10
Installing the lower triple clamp
Main work
–
Pull the fuel tank breather hose out of the steering head screw.
–
Open the cable holder in front of the left radiator and detach
the wiring harness.
–
Loosen screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and set it
aside.
V01785-10
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
V01757-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
B01605-10
SERVICE WORK ON THE CHASSIS 12
1
.
2
.
3
4
and protective ring
.
p. 149)
1
2
3
and O-ring
is correctly posi-
.
65