12 SERVICE WORK ON THE CHASSIS
90
–
Fill bleeding syringe
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the clutch slave cylinder, remove the protection cap,
remove bleeder screw
V01817-10
–
Now inject fluid into the system until it escapes from the
6
opening
of the master cylinder without bubbles.
–
Occasionally extract the fluid from the master cylinder reser-
voir to prevent overflowing.
–
Remove the bleeding syringe. Mount and tighten the bleeder
screw. Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
E00339-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Immediately clean up any brake fluid that has over-
flowed or spilled with water.
4
with the appropriate hydraulic fluid.
p. 147)
5
and mount bleeding syringe
4 mm (0.16 in)
4
.