Changing The Turn Signal Bulb; Changing The Combination Instrument Battery - KTM 350 EXC-F 2023 Owner's Manual

15.11

Changing the turn signal bulb

Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
15.12

Changing the combination instrument battery

Info
A change in weight on the vehicle may require a correc-
tion of the headlight range.
–
Tighten screw
Main work
–
Remove the screw and carefully take off turn signal glass
–
Press the turn signal bulb
counterclockwise by about 30°, and pull it out of the socket.
Info
Do not touch the reflector with your fingers and keep it
free from grease.
–
Press the new turn signal bulb carefully into the socket and
turn it clockwise until it stops.
Turn signal (RY10W / socket BAU15s) (
–
Position the turn signal glass.
–
Insert the screw and first turn counterclockwise until it
engages in the thread with a small jerk. Tighten the screw
lightly.
E00499-10
Finishing work
–
Check that the turn signal system is functioning properly.
Preparatory work
–
Remove the headlight mask with the headlight. (
ELECTRICAL SYSTEM 15
1
.
2
carefully into the socket, turn it
1
.
p. 143)
p. 114)
117