12.6
Installing the fork protector
12.7
Removing the fork legs
–
Position the fork protector on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
–
Position the fork protector on the right fork leg. Mount and
tighten screws
V00332-11
Guideline
Remaining screws,
chassis
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove the cable ties.
–
Remove screws
–
Hang the brake caliper and the brake line loosely to the side.
K00545-10
–
Loosen screws
–
Loosen screws
V01756-10
SERVICE WORK ON THE CHASSIS 12
1
.
M6
10 Nm (7.4 lbf ft)
2
.
3
.
M6
10 Nm (7.4 lbf ft)
(
p. 102)
1
and take off the clamp.
2
and take off the brake caliper.
3
. Take out the left fork leg.
4
. Take out the right fork leg.
p. 114)
p. 61)
63