KTM 350 EXC-F 2023 Owner's Manual page 68

12 SERVICE WORK ON THE CHASSIS
66
–
Position the upper triple clamp with the handlebar.
–
Mount screw
–
Secure the wiring harness and the clutch line with the cable
holder.
V01785-11
–
Position the fork legs.
Bleeder screws
Info
The rebound damping is located in right fork leg REB
(red adjuster).
The compression damping is located in left fork
leg COMP (white adjuster).
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
V01791-10
be flush with the upper edge of the upper triple clamp.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
V01790-10
–
Tighten screw
Guideline
Screw, top steering
head
–
Tighten screw
Guideline
Screw, top steering
stem
V01789-10
–
Tighten screws
Guideline
Screw, top triple
clamp
V01790-11
4
, but do not tighten yet.
5
are positioned toward the front.
6
.
M8
4
.
M20x1.5
7
.
M8
8
.
M8
15 Nm (11.1 lbf ft)
12 Nm (8.9 lbf ft)
20 Nm (14.8 lbf ft)
20 Nm (14.8 lbf ft)