12.19
Mounting the seat
12.20
Removing the air filter box cover
–
Raise the rear of the seat, pull the seat back, and lift it off.
H02218-10
–
Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is locked in correctly.
H02218-11
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
S03480-10
Condition
The air filter box cover is secured.
–
Remove the seat. (
–
Remove screw
V01815-10
SERVICE WORK ON THE CHASSIS 12
1
.
M6
10 Nm (7.4 lbf ft)
p. 70)
1
.
71