Mounting The Lens - Panasonic WV-CL920A Operating Instructions Manual

Mounting the Lens

Caution:
Before you mount the lens, loosen the fixing screw
on the side of the camera, and rotate the flange-
back adjusting ring counterclockwise until it stops.
If the ring is not at the end, the inner glass or CCD
image sensor may be damaged.
1. Mount the lens by turning it clockwise on the lens
mount of the camera.
2. Connect the lens cable to the auto iris lens connec-
tor on the side of the camera.
w
Screw
Flange-back
Adjusting Ring
Caution for Mounting the Lens
The lens mount should be a CS-mount (1"-32UN). In
case of a C-mount, it should be a C-mount adapter and
the lens weight should be less than 450 g (0.99 lbs). If
the lens is heavier, both the lens and camera should be
secured by using the supporter.
The protrusion at the rear of the lens should be as
shown below:
q
-15-
CS-mount: Less than 4 mm (5/32")