Panasonic WV-CL920A Operating Instructions Manual page 28

Notes:
• The higher the DNR level becomes, the more after
images and the less noise you will see.
• Selecting DNR-L is recommended when the picture
contains moving objects.
• When using a system controller, the parameters
(DNR-H/M/L) will not appear on its setup menu.
2. Press I (set) to open the AGC MAX (maximum
level) menu.
** AGC MAX **
LEVEL
RET END
3. Move the "I" cursor with L or M to adjust the
AGC level.
4. Move the cursor to RET and press I to return to
the CAMERA SETUP menu. When closing the
menu, move the cursor to END and press I.
....I....
- +
5. Electronic Sensitivity Enhancement
(SENS UP)
There are two modes for SENS UP.
AUTO: If you select x32 AUTO, for example, the
sensitivity is raised automatically to x32 max.
When AUTO is selected, AGC is automatically
set to ON.
FIX: If you select x64 FIX, for example, the sensitivi-
ty is raised to just x64.
** CAM SET UP **
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
LENS DRIVE
END
Move the cursor to the SENS UP parameter and select
the parameter for electronic sensitivity enhancement.
The preset values for SENS UP (electronic sensitivity
enhancement) change by pressing L or M as fol-
lows:
OFF X2 AUTO X4 AUTO X6 AUTO
X64 FIX X32 FIX X16 FIX
-29-
OFF
ALC
OFF
ON(DNR-H)
OFF
INT
ATW1
OFF
DC
SET UP ENABLE
X10 AUTO X16 AUTO X32 AUTO
X10 FIX X6 FIX X4 FIX X2 FIX OFF