Panasonic WV-CL920A Operating Instructions Manual page 25

** ALC CONT **
BACK LIGHT COMP
PRESET
PEAK MODE
MASK SET
LEVEL
RET END
** ALC CONT **
BACK LIGHT COMP
PRESET
PEAK MODE
LEVEL
RET END
2. Move the cursor to the PRESET parameter and
select ON.
The backlight compensation is automatically set.
3. If you want to change the video output level (picture
contrast), move the "I" cursor for LEVEL and adjust
the level.
4. Move the cursor to RET and press I to return to
the CAM SET UP menu.
OFF
OFF
...I.....
- +
ON
OFF
...I.....
- +
2-2. ALC Mode with PRESET OFF
These modes are effective when the main object in the
scene is not located in the center of the screen and a
source of bright light is located near the center of the
screen. In these modes, the picture is divided into 48
areas that mask the light to keep the clarity of the pic-
ture.
Note: If ELC is selected, set MASK SET and LEVEL
according to this procedure.
1. Move the cursor to the PRESET parameter and
select OFF.
The item MASK SET appears on the menu.
** ALC CONT **
BACK LIGHT COMP
PRESET
PEAK MODE
MASK SET
LEVEL
RET
-26-
OFF
OFF
...I.....
- +
END