Lens Mounting - Panasonic WV-NP502E Installation Manual

Lens mounting

Slowly rotate the lens clockwise to mount the lens and connect the lens cable to the ALC lens con-
nector of the camera.
ALC lens connector
Optional dedicated lens
Product name
ALC lens for 1/3 type CCD cameras
2x vari-focal (High resolution)
* If a lens for 1/3 type CCD camera other than the above is mounted and the image capture size
is set to "1280x720" or higher, the camera cannot achieve high resolution performance.
How to adjust the focus
z
Before adjustment, reset the back focus position by holding down the auto back focus button
for 5 seconds or more when the power is on. (This operation can also be performed on the
setup menu. Refer to the Operating Instructions (PDF).)
x
Adjust the view angle and focus coarsely by adjusting the zoom and focus of the lens to center
a subject in the screen, and then press the auto back focus button on the side of the camera
(☞ page 14) or perform the auto back focus function from the setup menu.
Refer to the Operating Instructions (PDF) for how to perform the auto back focus function from
the setup menu.
CS-mount (option)
Protruded portion
from mount face:
ø20 mm or less
Protruded portion from flange face:
4.5 mm or less
Model number
WV-LZA62/2
15