Table of Contents
Advertisement
To cancel the restricted
handset(s) and/or base unit
Repeat steps 1 to 4 on page 50,
and press
to select "Ext.#".
Erase the base unit and/or handset
number(s) by pressing the dialing
button(s) (
,
(0)
(1)
.
(ENTER)
Incoming Call Tone
While using one line, you can be informed if another call arrives on another
line by two tones. During an intercom call or while listening to messages
(p. 68, 71), you can also be informed by two tones if a call arrives. If you
set to ON, this incoming call tone will be heard for as long as another line
rings. To delete this incoming call tone, set to OFF. To set the incoming
call tone to sound twice, set to "2". Your base unit comes from the factory
set to OFF. Your cordless handset comes from the factory set to ON.
Programming must be carried out separately for the base unit and
cordless handset(s).
Make sure that the base unit/cordless handset is in the standby mode.
1
Press
(FUNCTION)
2
Press
or
points to "Ringer setting",
and press H.
3
Press
or
points to "Incoming call",
and press H.
• The current setting is displayed.
4
Select the desired setting, "2",
"On" or "Off", by pressing
.
I n c o m i n g c a l l
∨ ∧
E N T E R = S a v e
to
), and press
(8)
Base Unit Handset
.
until the arrow
until the arrow
or
t o n e : 2
To cancel the restriction
Repeat steps 1 to 3 on page 50.
Select the restriction number "1"
through "4" by pressing the dialing
button (
to
). Press
(1)
(4)
and press
(ENTER)
5
Press
(ENTER)
• A beep sounds.
• To return to the standby mode,
press (EXIT).
,
(CLEAR)
.
.
51
Hide quick links:
Advertisement
Table of Contents
