Other Programming; Registering A Handset To The Base Unit - Panasonic KX-TGD432 Operating Instructions Manual

Important:
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1
MMENUN#238
2
MbN: Select the desired setting. a
MSAVEN
3
Follow the directions on the display to
complete the operation.
Changing the start and end time
1
MMENUN#237
2
Follow the directions on the display to
complete the operation.
Selecting groups to bypass silent
mode
1
MMENUN#241
2
MbN: Select the desired groups. a
MSELECTN
R " " is displayed next to the selected
group numbers.
R To cancel the selected group:
MbN: Select the group. a Press
MSELECTN again. "
3
MSAVEN a MOFFN

Other programming

Changing the handset name
1
MMENUN#104
2
Enter the desired name. a MSAVEN a
MOFFN
Displaying the handset name
You can select whether or not the handset
name is displayed in standby mode. The
default setting is "Off".
1
MMENUN#105
For assistance, please visit http://shop.panasonic.com/support
TGD51x_OI(en)_1129_ver031.pdf 25
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Registering a handset to
the base unit
If for some reason the handset is not
registered to the base unit, re-register the
handset.
1
Handset:
MMENUN#130
2
Base unit:
Press and hold MLOCATORN for about 5
seconds.
R If all registered handsets start ringing,
3
Handset:
Press MOKN, then wait until a long beep
sounds.
Deregistering a handset
1
MMENUN#131
R All handsets registered to the base unit
2
MbN: Select the handset you want to
" disappears.
cancel. a MSELECTN
3
MbN: "Yes" a MSELECTN a MOFFN
Programming
press MLOCATORN again to stop, then
repeat this step.
are displayed.
2016/11/29 10:57:38
25