Registering Optional Cordless Handsets Using The Pin; Base Unit & Handset - Panasonic KX-TG4000B Operating Instructions Manual

Registering Optional Cordless Handsets
Using the PIN
The included cordless handset has been pre-registered with the base unit.
You will have to register optional cordless handsets. Handsets will not
operate unless registered with the base unit. A handset will be assigned
the number at registration. The handset number is used as the extension
number (p. 32, 58). After storing the PIN (p. 52), you must enter it at
registration. Only one handset can be registered at a time.
Make sure that the base unit and cordless handset are in the standby
mode. Registration must be completed within 1 minute.
1
Base unit:
Press
(FUNCTION)
2
Press or
points to "Registration", and
press H.
3
Press or
points to "HS registration",
and press H.
H a n d s e t
r e g i s t e r i n g
4
Cordless handset:
Press
(FUNCTION)
5
Press or
points to "Registration", and
press H.
6
While "HS registration" is
at the arrow, press H.
Handset
registering
Base Unit & Handset
.
until the arrow
until the arrow
.
until the arrow
7
Enter the PIN (p. 52).
HS registration
Enter PIN:----
• If you enter the wrong PIN, press
(CLEAR), and enter the PIN again.
8
Press
(ENTER)
9
Base unit/cordless handset:
Wait until a beep sounds on the
base unit and handset and until
both of the displays show the
assigned handset number.
Ex. Handset number is 5.
Base Unit
Handset5
registered
Cordless Handset
Handset5
registered
• To return to the standby mode,
press (EXIT).
• The handset number ([1] to [8]) will
be displayed on the handset.
ENTER=Set
.
53