Registration For Additional Cordless Handsets; Base Unit & Handset - Panasonic KX-TG4000B Operating Instructions Manual

Registration for Additional Cordless Handsets

The included cordless handset is pre-registered at the factory and
assigned the handset number 1. Do not try to register the handset
number 1 which has "[1]" on the display. Optional handsets must be
registered at the base unit. You can add up to 7 optional handsets to the
handset number 1. Only one handset can be registered at a time. The
handset number is used as the extension number (p. 32, 58).
The model number of the optional cordless handset is KX-TGA400B. To
order, contact your dealer or call 1-800-211-PANA(7262) to locate a
dealer.
Make sure that the base unit and cordless handset are in the standby
mode. Registration must be completed within 1 minute.
1
Base unit:
Press
(FUNCTION)
2
Press or
points to "Registration", and
press H.
3
Press or
points to "HS registration",
and press H.
H a n d s e t
r e g i s t e r i n g
4
Cordless handset:
Press
(FUNCTION)
5
Press or
points to "Registration", and
press H.
6
While "HS registration" is
at the arrow, press H.
Handset
registering
.
until the arrow
until the arrow
.
until the arrow
Base Unit & Handset
7
Base unit/cordless handset:
Wait until a beep sounds on the
base unit and handset and until
both of the displays show the
assigned handset number.
Ex. Handset number is 2.
Base Unit
Handset2
registered
Cordless Handset
Handset2
registered
• To return to the standby mode,
press (EXIT).
• The handset number ([1] to [8]) will
be displayed on the handset.
You can store a PIN (Personal
Identification Number) to prevent
unauthorized persons from registering
and using a cordless handset (p. 52).
Once the PIN is set, you must enter
the PIN at registration (p. 53). If you
forget your PIN, please refer to
"Clearing Settings" (p. 89).
19