Selecting The Line Mode; Base Unit; Erasing The Directory, Caller List And Redial List Base Unit Handset - Panasonic KX-TG4000B Operating Instructions Manual

Selecting the Line Mode

If the line is connected to a low voltage system such as a PBX, set to "B".
Otherwise, the line indicator may not operate properly, the Call Waiting
Caller ID feature may not be used (p. 46), you may not hear the incoming
call tone (p. 51), and the unit may not alert your pager (p. 82). All lines are
preset to "A".
Make sure that the base unit is in the standby mode.
1
Press
(FUNCTION)
2
Press or
points to "Line setting", and
press H.
3
Press or
points to "Set line mode",
and press H.
• The current settings are displayed.
L i n e m o d e
L 1 L 2
A A
Erasing the Directory, Caller List and Redial
List
Base Unit Handset
You can erase all entries in the directory, caller list and redial list.
Programming must be carried out separately for the base unit and
cordless handset(s).
Make sure that the base unit/cordless handset is in the standby mode.
1
Press
(FUNCTION)
2
Press or
points to "Initialization",
and press H.
3
Press or
points to "Dial data", and
press H.
• The current settings are displayed.
RDL=Redial List CID=Caller List
DIR=Directory
D e l e t e d i a l d a t a
R D L C I D D I R
N o N o
.
until the arrow
until the arrow
L 3 L 4
A A
.
until the arrow
until the arrow
N o

Base Unit

4
Select "B" or "A" by pressing
or for each line. To move to
another line, press H or I.
5
Press
(ENTER)
• A beep sounds.
• To return to the standby mode,
press (EXIT).
4
Select "Yes" to erase the list by
pressing or
to leave the list. To move to
another list, press H or I.
5
Press
(ENTER)
• A beep sounds.
• To return to the standby mode,
press (EXIT).
.
. Select "No"
.
55