Table of Contents
Advertisement
Using the data cloning function
Perform the operation of the data cloning function. Data such as the settings and adjustment values of the
projector can be copied to multiple projectors via LAN or using the USB memory.
r Data that cannot be copied
The following settings cannot be copied. Set these in each projector.
f The [PROJECTOR SETUP] menu → [PROJECTOR ID]
f The [PROJECTOR SETUP] menu → [DATE AND TIME] → [ADJUST CLOCK]
f The [PROJECTOR SETUP] menu → [DATA CLONING] → [LAN] → [WRITE PROTECT]
f The [SECURITY] menu → [SECURITY PASSWORD]
f The [SECURITY] menu → [CONTROL DEVICE SETUP]
f The [NETWORK] menu → [WIRED LAN]
f The [NETWORK] menu → [WIRELESS LAN]
f The [NETWORK] menu → [PROJECTOR NAME]
f The [NETWORK] menu → [NETWORK SECURITY]
f Security password
f Control device password
f Password set in "[Set up password] page (when accessed by administrator account)" (x page 250) of the web
control screen
f "[Network security] page" (x page 244) in the web control screen
f "[E-mail set up] page" (x page 245) in the web control screen
f "[Authentication set up] page" (x page 246) in the web control screen
f "[Crestron Connected(TM)] page" (x page 252) in the web control screen
f "[Crestron tools] page" (x page 249) in the web control screen
r Supported device
f Commercially available USB memory is supported.
The USB memory with a security function is not supported.
f Only the cards formatted in FAT16 or FAT32 can be used.
f Only the single partition structure is supported.
Note
f The data cloning function will not operate when the models of the projectors are different. For example, data of PT-SRQ35KC can be copied
to other PT-SRQ35KC projectors, but it cannot be copied to PT-SRZ34KC. Data cloning is limited to the same model.
Copying the data to another projector via LAN
Make the following settings on the projector of the copy destination in advance. For details, refer to "Setting
[WRITE PROTECT]" (x page 266).
f The [PROJECTOR SETUP] menu → [DATA CLONING] → [LAN] → [WRITE PROTECT] → [OFF]
Note
f To use the network function with the projector, it is necessary to set the password of the administrator account. (x page 218)
When a password is not set for the administrator account (when blank), the network function of the projector cannot be used. To copy the
data via LAN, set the passwords for the copy source projector and the copy destination projector.
1)
Connect all projectors to a switching hub using LAN cables. (x page 225)
2)
Turn on all the projectors.
3)
Press as to select [DATA CLONING] on the copy source projector.
4)
Press the <执行> button.
f The [SECURITY PASSWORD] screen is displayed.
5)
Enter a security password and press the <执行> button.
f The [DATA CLONING] screen is displayed.
6)
Press as to select [LAN].
Chapter 5 Operations — Using the data cloning function
ENGLISH - 265
Advertisement
Table of Contents
