Names And Functions Of The Interface Board (Optional) - Panasonic PT-SRQ35KC Operating Instructions Manual

Names and functions of the Interface Board (optional)

This projector is equipped with two SLOT NX-specification slots.
The input for HDMI, DVI-D, and SDI can be added by installing the optional Interface Board in the slot.
Attention
f Requesting a qualified technician to install or remove the Interface Board is recommended. A malfunction may occur due to static electricity.
Consult your dealer.
Interface Board for HDMI 2 input (Model No.: ET-MDNHM10C)
This board supports the HDMI signal.
1 <HDMI 输入 1> terminal (when installed in <SLOT 1>),
<HDMI 输入 3> terminal (when installed in <SLOT 2>)
This is a terminal to input HDMI signal.
Note
f When performing the simultaneous input of the 4K image (resolution of 3 840 x 2 160 or 4 096 x 2 160) using the Interface Board for HDMI 2
input (Model No.: ET-MDNHM10C), it is necessary for the firmware version of the Interface Board for HDMI 2 input to be 2.00 or later. If the
version is earlier than 2.00, the simultaneous process is not performed even if corresponding signal is input. Consult your dealer regarding
the version update to the latest firmware.
For details on how to confirm the firmware version, refer to "How to confirm the firmware version of the Interface Board (optional)"
(x page 32).
Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10C)
This board supports the DVI-D signal.
1 <DVI-D 输入 1> terminal (when installed in <SLOT 1>),
<DVI-D 输入 3> terminal (when installed in <SLOT 2>)
This is a terminal to input DVI-D signal.
Interface Board for DisplayPort 2 input (Model No.: ET-MDNDP10C)
This board supports the DisplayPort signal.
1 <DisplayPort 输入 1> terminal (when installed in <SLOT 1>),
<DisplayPort 输入 3> terminal (when installed in <SLOT 2>)
This is a terminal to input DisplayPort signal.
30 - ENGLISH
Chapter 1 Preparation — About your projector
3 1
3 1
3 1
2 3
2 <HDMI 输入 2> terminal (when installed in <SLOT 1>),
<HDMI 输入 4> terminal (when installed in <SLOT 2>)
This is a terminal to input HDMI signal.
3 Handle
2 3
2 <DVI-D 输入 2> terminal (when installed in <SLOT 1>),
<DVI-D 输入 4> terminal (when installed in <SLOT 2>)
This is a terminal to input DVI-D signal.
3 Handle
2 3
2 <DisplayPort 输入 2> terminal (when installed in <SLOT 1>),
<DisplayPort 输入 4> terminal (when installed in <SLOT 2>)
This is a terminal to input DisplayPort signal.
3 Handle