Table of Contents
Advertisement
f [QUAD PIXEL DRIVE] is set to [OFF] when the focus test pattern is displayed using the [TEST PATTERN] menu.
To enable the QUAD PIXEL DRIVE function while displaying the focus test pattern, set [QUAD PIXEL DRIVE] to [ON] again while displaying
the focus pattern.
[RASTER POSITION]
This will allow the position of the image to move within the display area arbitrarily when the input image is not
using the whole display area.
1)
Press as to select [RASTER POSITION].
2)
Press the <执行> button.
f The [RASTER POSITION] screen is displayed.
3)
Press asqw to adjust the position.
Note
f [RASTER POSITION] cannot be adjusted when the image of 1920 x 1080/240 is projected.
The video signal of 1920 x 1080/240 can be input when the optional High Frame Rate Upgrade Kit (Model No.: ET-SUK10) is applied.
124 - ENGLISH
Chapter 4 Settings — [ADVANCED MENU] menu
Advertisement
Table of Contents
