[Frame Lock]; [Raster Position] - Panasonic PT-RZ14K Operating Instructions Manual

[FRAME LOCK]

Set this function to display the image in 3D when the vertical scanning frequency of the signal is 25 Hz, 50 Hz,
and 103.9 Hz.
1) Press as to select [FRAME LOCK].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f [FRAME LOCK] is not displayed when a signal with the vertical scanning frequency other than the above is input or 2D images are
displayed.
f The image may flicker when [FRAME LOCK] is set to [ON].
f The displayed image may look discontinuous when [FRAME LOCK] is set to [OFF].

[RASTER POSITION]

This function will allow the position of the image to move within the displayable area arbitrarily when the input
image is not using the whole displayable area.
1) Press as to select [RASTER POSITION].
2) Press the <ENTER> button.
f The [RASTER POSITION] screen is displayed.
3) Press asqw to adjust the position.
132 - ENGLISH
Chapter 4 Settings — [ADVANCED MENU] menu
Decreases the flickering of the displayed image.
Synchronizes the displayed image to the vertical scanning frequency of the input signal.