Diagnostics; Print Config; Dump Mode - AGFA CG Triumvirate TT042-50 Series User Manual

3.3 Diagnostics

Print Config.

Dump Mode

3.3.1 Print Config.
This feature is used to print current printer configuration to the label. On the
printout, there is a print head test pattern, which is useful for checking if there is any dot
damage on the print head heater element. (Please refer to section 4.2.)
Diagnostics
> Print Config.
Dump Mode
Rotate Cutter
3.3.2 Dump Mode
Captures the data from the communications port and prints out the data received by printer. In
the dump mode, all characters will be printed in 2 columns as following. The left side
characters are received from your system and right side data are the corresponding
hexadecimal value of the characters. It allows users or engineers to verify and debug the
program. (Please refer to section 4.2)
Diagnostics
Pritn Config.
> Dump Mode
Rotate cutter
Note:
1. Dump mode requires 4" wide paper width.
2. Turn off / on the power to resume printer for normal printing.
3. Press FEED button to back to the previous menu.
Diagnostics
Rotate Cutter
1/4 Self Test ...
2/4 Printing ...
Exit
Printing ...
Dump Mode
1/1
58
configuration
1/1