AGFA CG Triumvirate TT042-50 Series User Manual page 25

4. Place the roll of media on the label supply spindle. Flip up the label roll guard.
Note:
When insert the 3 inch core adapter to the spindle, please making sure the arrow direction is as
following fig. When using 1 inch core media, please remove the 3 inch core adapters from the label
supply spindle.
3 inch media core
5. Pull label roll leading edge forward through the media guide bar, media sensor and place the
label leading edge onto the platen roller.
Media sensor
1 inch media core
Media guide bar
18
Media supply
spindle