Sensor - AGFA CG Triumvirate TT042-50 Series User Manual

Selections
Feed
Calibration
Length
No Motion
3.1.1-2.15 Label Top:
Print Setup
Media Power Up
Head Close
> Label Top
This option is used to adjust print position vertically on the label. Press the
button to move the cursor from left digit to right digit, and press the
the value from "+" to "-" or "0" to "1/2". Press the
printer. Press
default value is +000 and range is -120 to +120 dots.
3.1.1-2.16 Left Position:
Print Setup
Head Close
Label Top
> Left Position
This option is used to adjust print position horizontally on the label. Press the
button to move the cursor from left digit to right digit, and press the
the value from "+" to "-" or "0" to "9". Press the
Press
value is +0000 and range is -9999 to +9999 dots.

3.1.2 Sensor

Status
Printer will advance one label
Printer will calibration the sensor levels, determine length and
feed label
Printer determine length and feed label
Printer will not move media
15/17
Label Top
key to cancel the setting and return to the previous menu. The
16/17
Left Position
key to cancel the setting and return to the previous menu. The default
Sensor
Calibration
Description
+000
+0000
button to set the value into printer.
Exit
41
button to set
button to set the value into
button to set