A-3 Pre-Printed
This function will need to set the paper length and gap size before auto-calibrate the
sensor sensitivity. It can get the sensor sensitivity more accurately for pre-printed
media.
Gap Mode
Manual
>
Pre-Printed
Exit
When enter [Pre-Printed] option, you will see following message. Please complete
there steps:
Paper Len.
00812 dot
Gap Siz
0024 dot
Gap Mode
Pre-Printed
3/4
1. Press the
the cursor from left digit to right digit,
and press the
the value from "0" to "9" and the "dot/
mm/ inch". Press the
button to set the paper length into the
printer.
2. Press the
the cursor from left digit to right digit,
and press the
the value from "0" to "9" and the "dot/
mm/ inch". Press the
button to set the gap size into the
printer.
3. Then, printer will feed labels to
calibrate the sensor sensitivity
automatically. When calibration is
completed, the LCD screen will return
to the previous menu.
45
button to move
button to set
button to move
button to set