AGFA CG Triumvirate TT042-50 Series User Manual page 37

Press key to set the direction as 1, and
key to enable the setting. Press
previous menu.
The following 2 figures are the printouts of DIRECTION 0 and 1 for your reference.
DIRECTION 0
Note: If printing from enclosed software/driver, the software/driver will send out the
DIRECTION 0 command, which will overwrite the setting set from the front
panel.
3.1.1-1.4 Print Mode: (None/Batch Mode/Peeler Mode/Cutter Mode/Cutter Batch)
Print Setup
Density
Direction
> Print Mode
This option is used to set the print mode. Printer default setting is Batch Mode. When enter
this list, the print mode in the right side of " >" icon is the printer current setting. Press
and
enable the setting. Press
menu.
Printer Mode
None
Batch Mode
Peeler Mode
4/12
Print Mode
> Batch Mode
Peeler Mode
Cutter Mode
to select the different print mode and press
key to cancel the setting and return to the previous
Next label top of form is aligned to the print head burn line
location. (Tear Off Mode)
Once image is printed completely, label gap/black mark will be
fed to the tear edge for tear away.
Enable the label peel off mode.
30
to set it as 0, and
key to cancel the setting and return to the
DIRECTION 1
2/6
Description
button to