AGFA CG Triumvirate TT042-50 Series User Manual page 54

Bline Mode
Scan Mark
Intensity
Ref. Level
Bline Mode
Scan Paper
Intensity
Ref. Level
Note:
Normally, the value of "Ref. Level" for mark should be larger than paper for over
128. If the media sensor fails to do so, you have to manually change the
Intensity by pressing
Bline Mode
Complete
Intensity
Ref. Level
B-3 Pre-Printed
This function will need to set the paper length and gap size before auto-calibrate the
sensor sensitivity. It can get the sensor sensitivity more accurately for pre-printed
media.
Bline Mode
Manual
> Pre-Printed
Exit
3. Open the print head mechanism, put the black
mark under the media sensor. Press the
printer.
x
xxx
Media sensor
Black mark
4. Then, put the label without black mark under
the media sensor. Press the
button to set the value into the printer.
x
xxx
Media sensor
Label without black mark
and
5. The bline sensor calibration is complete.
Press the
will return to the previous menu.
x
xxx
3/4
47
button to set the value into the
to reach the above value.
button the LCD screen