Table of Contents
Advertisement
key to cancel the setting and return to the previous menu. The default value is
+000.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
3.1.1-2.4 Print Mode: (Tear Off / Peel Off / Cutter)
Print Setup
Print Speed
Tear Off
>
Print Mode
This option is used to set the print mode. Printer default setting is Tear Off. When enter this
list, the print mode in the right side of " >" icon is the printer current setting. Press
and
setting. Press
Printer Mode
Tear Off
Peel Off
Cutter
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
3.1.1-2.5 Print Width:
Print Setup
Tear Off
Print Mode
>
Print Width
This option is used to set print width. Press the
left digit to right digit, and press the
"mm". Press the
cancel the setting and return to the previous menu.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
4/17
Print Mode
>
Tear Off
Peel Off
Cutter
to select the different print mode and press
key to cancel the setting and return to the previous menu.
Next label top of form is aligned to the print head burn line
location.
Enable the label peel off mode.
Enable the label cutter mode.
5/17
button to set the value into printer. Press
1/4
Description
Print Width
812 dot
button to set the value from "0" to "9" or "dot" to
37
button to enable the
button to move the cursor from
key to
Advertisement
Table of Contents
