3.1.3.4 Stop Bit
:
(s)
Serial Comm.
Parity
Data Bits
>
Stop Bit(s)
This option is used to set the RS-232 Stop Bits. The default setting is "1" stop bit. Press
and
button to set the value into printer. When you enter this list, the option in the right side of ">"
icon is the printer current setting. Press
the previous menu.
4/5
Stop Bit(s)
>
1
2
Exit
buttons to select the different Stop Bits and press
52
1/3
key to cancel the setting and return to