Mounting Implement - Bad Boy 1025H Operator's Manual

Hide thumbs Also See for 1025H:
Table of Contents

Advertisement

4-26
BAD BOY TRACTOR
DANGER
Only use drawbar to tow and
keep the 3 point linkage in the
raised position when towing
with the drawbar.
Position can create unbalance
causing the tractor to roll-over &
result in the death or serious in-
jury.
1025H.indb 26
1025H.indb 26

MOUNTING IMPLEMENT

(1) Rear PTO Shaft Cover
Adjust the yoke rod on the lower links to
suit the implement in use. Attach the left
lower link, then attach the right lower link
using the adjusting handle on the leveling
box if required.
Attach the top link. Attach the PTO shaft
to the tractor if used, making sure that it is
locked in place.
Adjust the check chains to suit the imple-
ment and tighten the locknuts. To remove
an implement reverse the procedure.
CAUTION
Do not attach a PTO shaft with
the engine running and ensure
all safety shields are in place.
2021-07-06 오전 11:07:44
2021-07-06 오전 11:07:44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents