Checking The Wiring Harness And Fuses; Replacing Fuses - Bad Boy 1025H Operator's Manual

CHECKING THE WIRING HARNESS AND FUSES

Loose wires make inferior connections
and damaged wires can cause short
circuits, fires burnt wiring or reduce the
efficiency of the components.
Replace or repair any faulty wiring or in-
sulation.
If a fuse burns out again after it has
been replaced, do not replace it with
wire or a high capacity fuse, find the
cause and rectify it or get an auto elec-
trician to do so.
Where insulation is chafed or peeled
off, recover the area with a good quali-
ty insulation tape. Where wiring comes
out of it's fitting, replace it correctly with
the standard fitting.
1025H.indb 17 1025H.indb 17
IMPORTANT
Incorrect wiring or fuses can

cause fires to both the tractor
and surrounding area so get the
dealer to check it annually.
Likewise fuel pipes and wiring

age with use.
Ask your dealer to check it at

least once every 2 years and re-
place as required.
MAINTENANCE

REPLACING FUSES

The circuit has blade type fuses in its
wiring circuit When a fuse has blown,
replace it with one of the same value.
Using a large capacity fuse or wire
burns out the wiring system.
Use fuse tongs to replace fuses.
6
17
-
6
2021-07-06 오전 11:07:52 2021-07-06 오전 11:07:52