Bad Boy 1025H Operator's Manual page 73

(1) PTO Lever
1025H.indb 21 1025H.indb 21
MID PTO

The speed of mid PTO is 2,000rpm.
Use the PTO lever to engage.
The PTO switch must be OFF before
PTO is engaged.
1. Decrease engine speed to near
idle.
2. Make sure that PTO switch is OFF.
3. Engage mid PTO using the PTO
lever.
4. If rear PTO is needed to engage,
shift the PTO lever to correct posi-
tion.
5. Turn on the PTO switch.
6. Increase engine speed to desired
speed.
Engine RPM MID PTO SPEED
2,875 2,000 RPM
3,000 2,087 RPM
OPERATION DESCRIPTION
IMPORTANT
If operator turns off PTO switch,

rear PTO and mid PTO are off at
once.
CAUTION
Do not operate any implement

at a high speed than is speci-
fied for it.
When making adjustments to

the implement stop the engine
to avoid serious injury.
When leaving the tractor stop

the engine, and remove the
key. Set the parking brake.
2021-07-06 오전 11:07:44 2021-07-06 오전 11:07:44
4-21
4