Rops Folding Method; How To Fold Down The Rops; How To Stand Up The Rops - Bad Boy 1025H Operator's Manual

5
28
BAD BOY TRACTOR
-

ROPS FOLDING METHOD

HOW TO FOLD DOWN THE ROPS

Raise the safety frame.
Pull the pins on both
sides and turn them
about 1/4 turns.
1. Turn the handle to separate the
push plate and the ROPS.
2. Pull the pins on both sides of the
tractor and turn them about 1/4
turns to release the lock of the
ROPS.
3. Raise the ROPS a little.
4. Replace the pin.
5. Fold down the ROPS, and the pins
will lock into place.
※ If it is not certain whether the pins
are fixed, shake the frame a little
bit to fix the pins for sure.
1025H.indb 28 1025H.indb 28

HOW TO STAND UP THE ROPS

1. Pull the pins on both sides of the
tractor and turn them about 1/4
turns to release the lock of the
ROPS.
2. Raise the ROPS a little.
3. Replace the pins.
4. Stand the ROPS up, and the pins
Replace
will lock into place.
the pins.
※ If it is not certain whether the pins
are fixed, shake the ROPS a little
bit to fix the pins for sure.
5. Turn the handle to fix the push
plate and the frame.
CAUTION
•
Don't fasten your seat belt af-
ter folding ROPS.
•
When you drive tractor, fold
up vertically.
•
Fasten your seat belt after
folding up ROPS.
•
When working with the tractor,
don't fold down ROPS.
•
Don't change ROPS without
authority.
•
Before using tractor, check
your ROPS support and other
parts.
•
I f t h e r e i s d a m a g e t o t h e
ROPS, change ROPS at once.
[Otherwise]
If the tractor rolls over, you
could be injured or death may
occur.
※ ROPS are a very important
structure for protection on
roll over, always check your
ROPS.
2021-07-06 오전 11:07:50 2021-07-06 오전 11:07:50