Bad Boy 1025H Operator's Manual page 140

8
4
BRANSON TRACTOR
-
drops that will produce condensa-
tion that will be the cause of rust
formation. And lock the fuel cock
to "C". (Closed)
4. Disconnect the battery completely
and store it away from the tractor
in a well-ventilated, dry, dark place
if possible. When the battery is at-
tached to the tractor, make sure to
connect the (+) terminal first.
5. Change the engine oil and run the en-
gine to circulate oil throughout all the
engine parts for about 5 minutes.
6. Drain the coolant from the radiator.
After draining the coolant, attach a
tag of "No coolant, do not start" to
the steering wheel. If there is an-
ti-freeze in the cooling system, it is
not necessary to drain it.
7. Check the bolts and nuts for loose-
ness, and tighten if necessary.
8. Add oil, fluid and fuel to each part
according to the maintenance
chart.
1025H.indb 4 1025H.indb 4
9. Apply a slight coat of grease or
oil onto the tractor parts where is
easy to be rust such as bare metal
surface.
10. Inflate the tires to a pressure a
little higher than usual.
11. Place chocks behind and in front
of the rear wheels.
12. Store it in a dry indoor place to
avoid rain or snow and cover the
body.
13. Keep the clutch pedal in a de-
pressed position to avoid rust on
the clutch.
14. Put all controls into the neutral
position.
2021-07-06 오전 11:07:53 2021-07-06 오전 11:07:53