7
6
BRANSON TRACTOR
-
TROUBLESHOOTING - HYDRAULIC SYSTEM
Symptom
1. The implement does not be lifted.
2. The implement does not be low-
ered.
1025H.indb 6
1025H.indb 6
Inspection item
Is the hydraulic flow control dial in the close
position?
Is the transmission oil level low?
Is the air taken in the fluid suction system?
Is the oil filter clogged?
Is the Selective control valve lever in the de-
tent position?
Is the hydraulic pump defective?
Is the cylinder damaged?
Is the hydraulic flow control dial in the close
position?
Is the position control lever on the lowest po-
sition?
The implement cannot be lowered even
though the position control lever is placed in
the lowest position.
Action
Adjust the hydraulic flow control dial.
Refill the transmission oil.
Tighten the filter or connection parts. Re-
place the pipe or O-ring if damaged.
Clean or replace it.
Put the Selective control valve lever in
the neutral position.
Contact the dealer for repair.
Contact the dealer for repair.
Adjust the hydraulic flow control dial.
Move the position control lever.
Contact the dealer for repair.
2021-07-06 오전 11:07:52
2021-07-06 오전 11:07:52