Toyota Super SP200 Series Instruction Manual page 9

Handwheel
Pattern selection dial and
stitch length dial
Stitch length dial
Turn the dial to adjust the stitch length.
The stitch length becomes longer as the numbers
becomes larger. The stitch length becomes shorter
as the numbers becomes smaller.
Longer
Pattern selection dial
Turn the dial until the desired pattern is aligned with the mark above
the dial.
Align
the desired pattern.
First turn the dial to
the letter for the desired pattern.
Use the handwheel to manually raise and lower the needle.
Note:
Always turn the handwheel toward yourself (in the
direction of the arrow).
If the handwheel is turned in the opposite direction,
the thread may become tangled.
Model XXX34C/34D/SuperJ34
with the mark above the dial and then select the letter for
Reverse sewing lever
Press down the reverse lever, when sewing in
reverse.
lever to return to forward sewing.
For operating details,
refer to pages 23 - 25.
Mark above dial
Longer
Shorter
Model XXX26C/26D/SuperJ26
to the mark above the dial and then select
EN
2
Short Long
Shorter
9